Fabricated Letters in Perspex

These are chunky individual letters custom made by hand using perspex. Perspex is an amazing matarial with a unique distingishable look.

These signs are not cheap but certainly make your shop front look like have have spared no expense in your image.

They regarded as the prepium way of branding and 90% of the time they are internally lit with Neon tubing giving the illumination.

They mounted on pins and raised off the cerface to stand out. They can have the same colour returns ( the sides ) or they can be made with different colours returns. The faces are cut with a cnc router and the sides are fabricated to perfection.

Fabricated lettering whether in metal or acrylic is considered to be a signmaking
standard specified by sign designers, architects and end-users everywhere. The
fabricated letter form can convey just the right image for most organisations whether
in illuminated or non illuminated form.

We offer all the build specifications from fabricated flat face to rim and return, rimless,
bevels and bezels in a huge range of sizesfrom as small as 75mm (in some materials) toover 2,500mm.

You also have a choice of illumination method (see separate section) using neon or
LED.

Our paint shop can finish in any any PMS colour in either a hard wearing stove enamelled finish or architectural quality powder coating. Whatever your requirement we can advise on the best combination of materials, build, illumination and finish.

Backtrays and fixing methods

Full metal backtrays are used to house Letterbrite or neon for face illuminated letters.
The backtray is fabricated from the same material as the letter face and has 25mm deep returns. It is fitted to the fabricated letter by discreet button head fixings. Backtrays are predrilled for wall fixing.

Foamex backtrays are cut from 10mm thick material and are a cheaper lightweight alternative to full metal backtrays.They are fitted by means of screws through the letter return. Foamex backtrays are also drilled for wall fixing. Clear acrylic backtrays are supplied with halo illuminated letters. Generally cut from 5mm thick material the backplates are fitted to thefabricated letter by means of loose brackets.They are drilled to accept screw fixings and 35mm long spacers.

Loose half brackets are used for fitting letters to internal wall surfaces.As the loose brackets are fitted to the substrate by means of discretely positioned woodscrews the letters can easily be removed when redecoration takes place.
Soldered half brackets are used on letters when a more permanent method of fixing is required. Brass locators can be fitted to the half brackets when the letter is required to stand off the wall surface (approximately 15mm). Stud fixings willallow the letter to be flush fitted to the wallsurface.

Full bridges span the full width of the letter stroke and are fitted to larger letters to ensure that the letter remains rigid. Brass locator or stud fixings can be fitted to the reverse of each letter