Description

This system of flex face signage is usually applicable to smaller installations, but is otherwise principally identical to its cousins. It is not as readily interchangeable as the pocket and bar system, so would tend to be used for a more permanent application.

May be double sided if required.

Construction

Tubular steel frame structure drilled for pop rivets. Cladding by Cromadek sheeting, plastic or fibreglass panels. Fluorescent tubes and electrical hardware is fixed to the steel frame by means of clips and mounting screws or pop rivets.

Decoration

The flex face may be decorated in several ways:
1. Full colour digital printing
2. Cut vinyl
3. Spray and hand painted techniques
3. Attachment of flat or fabricated Perspex letters and forms

Applications

1. Medium sized advertising hoardings
2. Indoor or outdoor
3. Shopping centres
4. Retail environments

Sizes

From ± 600 x 900 mm to 3000 x 6000 mm and over.

1. May be mounted flat on any flat surface.
2. Supported on freestanding structure

Finishes

Frames and claddings are spraypainted or powder coated except where pre-coated products are available.