Description

The useful simplicity of an internally lit box can be greatly extended by fabricating the box to a unique shape that is linked to, and therefore contributes to, the brand-building objectives of the host identity.

Construction

Square tubular steel subframe welded up with Cromadek side panels glued or pop riveted in place. Perspex faces are held in place either side by aluminium angle cover strips.

Vertical steel structural supports also serve to carry the fluorescent tubes, starters and ballast transformers. Faces cut to shape from translucnt perspex.

Decoration

Decoration on faces of translucent Perspex, may include combinations of flat, printed or 3D lettering and graphics as illustrated in this manual.

Application

1. Indoor or outdoor applications
2. Shops & shopping centres
3. Hotels and restaurants

Sizes

From ± 600 x 900 mm to 1500 x 3000 mm.

Installation

1. Hung from an overhang on bolted thread-bar supports, or
2. Mounted off a vertical wall with brackets as a projector.
3. Freestanding on a support structure

Finishes

Spraypainting, powder coating or pre-coated finishes are applicable, with special attention to weather-proofing for
exterior applications.